Settings; Information List - Siemens Siprotec 7UM611 Manual

2 Functions

2.12.3 Settings

Addresses which have an appended "A" can only be changed with DIGSI, under Ad-
ditional Settings.
Addr. Parameter
3101 REVERSE POWER
3102 P> REVERSE
3103 T-SV-OPEN
3104 T-SV-CLOSED
3105A T-HOLD

2.12.4 Information List

No. Information
5083 >Pr BLOCK
5086 >SV tripped
5091 Pr OFF
5092 Pr BLOCKED
5093 Pr ACTIVE
5096 Pr picked up
5097 Pr TRIP
5098 Pr+SV TRIP
88
Setting Options
OFF
ON
Block relay
-30.00 .. -0.50 %
0.00 .. 60.00 sec; ∞
0.00 .. 60.00 sec; ∞
0.00 .. 60.00 sec; ∞
Type of In-
formation
EM >BLOCK reverse power protection
EM >Stop valve tripped
AM Reverse power prot. is switched OFF
AM Reverse power protection is BLOCKED
AM Reverse power protection is ACTIVE
AM Reverse power: picked up
AM Reverse power: TRIP
AM Reverse power: TRIP with stop valve
Default Setting
OFF Reverse Power Protection
-1.93 % P> Reverse Pickup
10.00 sec Time Delay Long (without Stop
Valve)
1.00 sec Time Delay Short (with Stop
Valve)
0.00 sec Pickup Holding Time
Comments
Comments
7UM61 Manual
C53000-G1176-C127-3