Table of Contents
Advertisement
Functions
This chapter describes the numerous functions available on the SIPROTEC
7UM61. It shows the setting possibilities for all the functions in maximum configura-
tion. Instructions for deriving setting values and formulae, where required are provid-
ed.
Additionally it may be defined which functions are to be used.
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
2.20
2.21
2.22
7UM61 Manual
C53000-G1176-C127-3
Introduction, Reference Systems
Functional Scope
Power System Data 1
Change Group
Power System Data 2
Definite-Time Overcurrent Protection (I>, ANSI 50/51) with Undervoltage
Seal-In
Definite-Time Overcurrent Protection (I>>, ANSI 50, 51, 67) with Direction
Detection
Inverse-Time Overcurrent Protection (ANSI 51V)
Thermal Overload Protection (ANSI 49)
Unbalanced Load (Negative Sequence) Protection (ANSI 46)
Underexcitation (Loss-of-Field) Protection (ANSI 40)
Reverse Power Protection (ANSI 32R)
Forward Active Power Supervision (ANSI 32F)
Impedance Protection (ANSI 21)
Undervoltage Protection (ANSI 27)
Overvoltage Protection (ANSI 59)
Frequency Protection (ANSI 81)
Overexcitation (Volt/Hertz) Protection (ANSI 24)
Rate-of-Frequency-Change Protection df/dt (ANSI 81R)
Jump of Voltage Vector
90-%-Stator Earth Fault Protection (ANSI 59N, 64G, 67G)
Sensitive Earth Fault Protection (ANSI 51GN, 64R)
2
®
4
29
31
34
39
40
42
46
52
59
70
77
85
89
92
103
106
109
113
118
123
128
136
27
Advertisement
Table of Contents
