Siemens Siprotec 7UM611 Manual page 245

C–I/O–1 Input / The layout of the input/output board C-I/O-1 is shown in the following Figure.
Output Board
Figure 3-5
In the version 7UM612 , for the Input/Output module C–I/O–1, binary output BO 4 can
be configured as normally open or normally closed (see also overview diagrams in Ap-
pendix A.2).
Table 3-7
7UM61 Manual
C53000-G1176-C127-3
Input/output board C-I/O-1 with representation of the jumper settings required
for the board configuration
Jumper Setting for Relay Contact for Binary Output BO4
Jumper Normally open contactor Normally closed contact
X40 1–2
3.1 Mounting and Connections
Presetting
2–3 1–2
245