Nano Quick Start
If you are familiar with GigE Vision cameras, follow these steps to quickly install and acquire
images with Genie Nano and Sapera LT in a Windows OS system. If you are not familiar with
Teledyne DALSA GigE Vision cameras go to
•
Your computer requires a second or unused Ethernet Gigabit network interface (NIC) that is
separate from any NIC connected to any corporate or external network.
Install Sapera 8.01 (or later) and make certain to select the installation for GigE Vision support.
•
•
Connect the Nano to the spare NIC and wait for the
show that the Nano is connected. The
Testing Nano without a Lens
Start CamExpert. The Nano Status LED will be steady Green.
•
From the Image Format Feature Category, select the Moving Grey Diagonal Ramp test pattern
•
from the Test Image Selector Parameter.
Click grab. You will see the moving pattern in the CamExpert display window.
•
Testing Nano with a Lens
Start CamExpert. The Nano Status LED will be steady Green.
•
Click the
Display Control button
•
Click grab.
•
•
Adjust the lens aperture plus Focus, and/or adjust the Nano
The Camera Works — Now What
Consult this manual for detailed Networking and Nano feature descriptions, as you write, debug,
and optimize your imaging application.
•
74
Nano Quick Start
Connecting the Genie Nano
GigE Server Icon
Nano Status LED
to show a full camera image on CamExpert display.
Camera.
in the Windows tray to
will change to steady Blue.
Exposure Time
as required.