Firmware Files For Model M4060; Specifications: C4060 - Teledyne G3-GM10-M0641 User Manual

SNR (dB)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size

Firmware Files for Model M4060

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for this model are listed below. The xx denotes the current build number.
M4060
Standard
•
"Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Mono_STD_Firmware_7CA18.xx.cbf"
High Sensitivity
•
"Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M_Mono_HSD_Firmware_7CA18.xx.cbf"

Specifications: C4060

Supported Features
Resolution
Sensor
Pixel Size
Shutter type
Firmware option
(Field programmable)
Full Well charge; dependent on
Firmware Design Loaded
Sensitivity to Saturation
Max. Internal Frame Rate
Full resolution
Maximum Sustained Frame Rate
Output (with TurboDrive v1)*
Maximum Sustained Frame Rate
Output (without TurboDrive)
Pixel Data Formats
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Trigger to Exposure Start jitter
(Reset Exposure Alignment)
Nano Series GigE Vision Camera
33.01
Full frame electronic global shutter function
High Sensitivity
Design (Bayer)
2750e- (max)
4x
56 fps
28 fps (8-bit)
13 fps (8-bit)
Bayer 8-Bit
2 line time (15.8µs)
Max 1 line
0 to 7.89µs
39.38 dB (in 8-Bit Pixel Format)
C4060
4112 x 2176
Sony IMX255 (8.9M)
3.45 µm x 3.45 µm
Standard Design
(Bayer)
11ke (max)
1x
46 fps
Bayer 8-Bit
2 line time (19.5µs)
0 µs
Max 1 line
0 to 9.72µs
0 µs
Genie Nano Specifications
RGB-Output
Design
N/A
3.2fps (RGBA)
4.3 fps (RGB)
6.5 fps (Yuv422)
13 fps (mono8)
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
•
41