Firmware Files For Model C4040 - Teledyne G3-GM10-M0641 User Manual

Image Correction
Image Flip Support
Multi-ROI Support
On-Board Image Memory
Output Dynamic Range (dB)
SNR (dB)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size

Firmware Files for Model C4040

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for this model are listed below. The xx denotes the current build number.
C4040
Bayer Output
•
"Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_STD_Firmware_8CA18.xx.cbf"
High Sensitivity Bayer Output
•
"Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_HSD_Firmware_8CA18.xx.cbf"
RGB Output
•
"Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _RGB_Firmware_8CA18.xx.cbf"
•
46 Genie Nano Specifications
Yes, In-Sensor, Vertical and Horizontal
Yes, In-Sensor, up to 16 ROI (mutually exclusive with in-sensor binning)
56.43
32.01
no
220MB
76.46 dB (in 8-Bit Pixel Format)
39.50 dB (in 8-Bit Pixel Format)
Nano Series GigE Vision Camera