Firmware Files For Model 4030 & 4020 - Teledyne G3-GM10-M0641 User Manual

Binning Support
Decimation Support
Defective Pixel Replacement
Image Correction
Image Flip Support
Multi-ROI Support
On-Board Image Memory
Output Dynamic Range (dB)
SNR (dB)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size
Firmware Files for Model 4030 & 4020
The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for these models are listed below. The xx denotes the current build number.
M4020 & M4030
Standard
•
"Genie_Nano_Sony_IMX267-304_9M-12M_Mono_STD_Firmware_ECA18.xx.cbf"
C4020 & C4030
Bayer Output
•
"Genie_Nano_Sony_IMX267-304_9M-12M_Bayer_STD_Firmware_FCA18.xx.cbf"
• RGB Output
"Genie_Nano_Sony_IMX267-304_9M-12M_RGB_Output_Firmware_FCA18.xx.cbf"
•
50 Genie Nano Specifications
Yes In-FPGA
(summing and average)
2x2, 4x4
Yes, In-Sensor, Vertical and Horizontal
Yes, in FPGA, up to 16 ROI (mutually exclusive with binning)
No
No
Yes, up to 512 positions
No
220MB
76.4 dB
39.6 dB
Nano Series GigE Vision Camera