Image Flip - Multi-Roi Mode - Teledyne G3-GM10-M0641 User Manual

Image Flip – Multi-ROI Mode
Image acquisition flips with multi-ROI enabled is implemented as follows:
• The first graphic below shows a simple multi-ROI of two areas, where the camera output is
composed of only those two areas.
As shown in the second graphic, the multi-ROI implementation resizes the programmed ROI
•
areas so that the same exact image areas are output by the camera but flipped as expected.
Note that the ROI indexes do not transpose—just their size and offsets.
•
All multi-ROI setup constraints remain as described in the previous section describing the
•
Multi-ROI mode.
ROI (x1,y1)
2 ROI Areas Defined
ROI (x1,y1)
2 ROI Areas After Horizontal Flip
Nano Series GigE Vision Camera
ROI (x2,y1)
Horizontal Flip with Multi-ROI
ROI (x2,y1)
ROI (x1,y1)
ROI (x2,y1)
Camera Output
ROI (x1,y1) ROI (x2,y1)
Camera Output
Operational Reference
•
169