Trigger Overlap: Feature Details - Teledyne G3-GM10-M0641 User Manual

Trigger Overlap: Feature Details

The Trigger Overlap feature defines how the Nano handles triggers that might occur more
frequently than the Frame Active period (an exposure plus readout period).
If TriggerOverlap=OFF, then triggers received before the end of the Frame Active period are
ignored. Other TriggerOverlap values are dependent on the Nano model and sensor used.
TriggerOverlap=Off
•
No trigger overlap is permitted.
•
Diagram Conditions:
TriggerMode=On
•
ExposureMode=Timed
•
• TriggerActivation=RisingEdge
• TriggerDelay=0
TriggerSelector=FrameStart
•
• ExposureAlignment=Synchronous
TriggerOverlap=Off
Trigger Input
Frame Exposure
Frame Readout
Timing specific to OnSemi models
Minimum Trigger to Exposure start delay: 3.23µs (shown as 4µs)
•
• Readout Time:
• M/C2590: 23242µs + 16.5µs
• M/C1930: 10831µs + 16.5µs
• M/C1280: 5676µs + 16.5µs
• M/C800: 2332µs + 16.5µs
• M/C640: 1602µs + 16.5µs
Nano Series GigE Vision Camera
Trigger Exclusion Period
Exposure 1
Readout 1
Frame 1 Active period
Trigger Exclusion Period
Exposure 2
Readout 2
Frame 2 Active period
Operational Reference
•
113