Firmware Files For Models 1240 - Teledyne G3-GM10-M0641 User Manual

Exposure Alignment)
Trigger to Exposure Start jitter
(Reset Exposure Alignment) *
Actual Exposure Time Minimum
(see "exposureTimeActual" feature)*
Min. Time from End of Exposure to
Start of Next Exposure
(second frame)
Horizontal Line Time:
Readout Time
Auto-Brightness
Black offset control
Gain Control
Binning Support
Decimation Support
Defective Pixel Replacement
Image Correction
Image Flip Support
Multi-ROI Support
On-Board Image Memory
Output Dynamic Range (dB)
SNR (dB)
* Note: The actual internal minimum exposure may be different than what is programmed. Use the feature
Sensor Control category to read back the actual sensor exposure. The exposure start sensor event is delayed 4 µs from the actual start.

Firmware Files for Models 1240

M1240
Standard
•
Genie_Nano_OnSemi_Python_P3_1.3M_Mono_STD_Firmware_12CA18.x.cbf
C1240
Standard
•
Genie_Nano_OnSemi_Python_P3_1.3M_Bayer_STD_Firmware_13CA18.x.cbf
•
56 Genie Nano Specifications
11351 µs – Normal Readout for 1280 x 1024
Add 150 µs when overlapping Exposure and Readout
Detailed formula : ( Horizontal line time at current resolution * number of lines ) +
(3 * ( line time of the 1280 model ))
Yes , with Auto-Exposure and AGC (FPGA Gain)
In-sensor Analog Gain (1.0x to 8x) in 11 gain step
(1.0, 1.14, 1.33, 1.6, 2.0, 2.29, 2.67, 3.2, 4.0, 5.33, 8.0)
In-sensor Digital Gain (1x to 32x) in 0.01x step
In-FPGA Digital Gain (1x to 4x) in 0.007x step
Yes In-FPGA
(summing and average,
2x2, 4x4 )
Yes In- Sensor
(averaging 2x2)
Yes, Sensor FPN correction feature
Yes in Sensor, up to 16 ROI (mutually exclusive with binning)
61.8 dB (in 10-Bit Pixel Format)
39.7 dB (in 10-Bit Pixel Format)
0 µs
34 µs
(increment steps of 1µs)
165 µs – Normal Readout
11.07 µs – Normal Readout
Yes (in DN)
No
Yes, up to 512 positions
Yes In-Sensor - Vertical Only
90MB
Nano Series GigE Vision Camera
No
"
exposureTimeActual" from the