Reset Exposure Alignment
Sensor timing is reset to initiate exposure when a valid trigger is received. Readout is sequential to
exposure, reducing the maximum achievable frame rates. That is, a trigger received during
exposure or readout is ignored since data would be lost by performing a reset.
Sensor Exposure Timing: Sony Sensor Models
Nano cameras with Sony sensors have general timing characteristics using synchronous exposure
mode, as described below.
Trigger Characteristics: Start of Exposure
External
Trigger Input
rising edge active
Internal Trigger Control
Internal Continuous Horizontal Line Time Clock
Actual Sensor Exposure Start Delay
after 2 H -Time
Sensor Exposure
Additional triggered exposure mode features and timing are described in the
Refer to
Model Part Numbers
specifications.
•
100
Operational Reference
Start of Exposure Details
for Nano Sony Sensor Models
Input propagation Delay (see Input Signals Electrical Specifications)
Delay to Next Horizontal Time (delay jitter)
Re-alignment delay is maximum
of 1 Horizontal Line Time
for the available Nano models using Sony sensors and their timing
<< Exposure Active >>
I/O Controls
Nano Series GigE Vision Camera
Category.