Firmware Files For Models 2020; Specifications: M2050 - Teledyne G3-GM10-M0641 User Manual

On-Board Image Memory
Output Dynamic Range (dB)
SNR (dB)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size

Firmware Files for Models 2020

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for these models are listed below. The xx denotes the current build number.
M2020
• Standard
"Genie_Nano_Sony_IMX264-265_3.2M-5.1M_Mono_STD_Firmware_9CA18.xx.cbf"
C2020
Bayer Output
•
"Genie_Nano_Sony_IMX264-265_3.2M-5.1M_Bayer_STD_Firmware_ACA18.xx.cbf"
RGB Output
•
"Genie_Nano_Sony_IMX264-265_3.2M-5.1M_RGB_Firmware_ACA18.xx.cbf"

Specifications: M2050

Supported Features
Resolution
Sensor
Pixel Size
Shutter type
Firmware option
(Field programmable)
Full Well charge; dependent on
Firmware Design Loaded
Sensitivity to Saturation
Max. Internal Frame Rate
Full resolution
Maximum Sustained Frame Rate
Output (with TurboDrive v1) *
Maximum Sustained Frame Rate
Output (without TurboDrive)
Pixel Data Formats
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Nano Series GigE Vision Camera
76.4 dB (in 12-Bit Pixel Format)
39.6 dB (in 12-Bit Pixel Format)
Sony IMX252 (3.2M)
3.45 µm x 3.45 µm
Full frame electronic global shutter function
High Sensitivity Design
2750e- (max)
4x
143 fps
2 line time
(8.8 µs)
Max 1 line
(0 to 4.4µs)
90MB
Nano-M2050
2064 x 1544
Standard Design
11ke (max)
116 fps
82 fps (8-bit)
38 fps (8-bit)
Mono 8-bit
2 line time
(10.8 µs)
0 µs
Max 1 line
(0 to 5.4µs)
Genie Nano Specifications
1x
•
29