Firmware Files For Models; Specifications: M1240, C1240 - Teledyne G3-GM10-M0641 User Manual

Firmware Files for Models 640, 800

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/.
models are listed below. The xx denotes the current build number.
M640, M800
• Standard
"Genie_Nano_OnSemi_Python_0.3M-0.5M-1.3M-2M-5M_Mono_STD_Firmware_5CA18.xx.cbf"
C640, C800
Bayer Output
•
"Genie_Nano_OnSemi_Python_0.3M-0.5M-1.3M-2M-5M_Bayer_STD_Firmware_6CA18.xx.cbf"
RGB Output
•
"Genie_Nano_OnSemi_Python_0.3M-0.5M-1.3M-2M-5M_RGB_Output_Firmware_6CA18.xx.cbf"

Specifications: M1240, C1240

Supported Features
Resolution
Sensor
Pixel Size
Shutter type
Full Well charge
Firmware option
(Field programmable)
Max. Internal Frame Rate
Full Resolution (1280 x 1024)
Maximum Sustained Frame Rate
Output (with TurboDrive v1)
Maximum Sustained Frame Rate
Output (without TurboDrive)
Pixel Data Formats
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
Trigger to Exposure Start jitter
(best case with Synchronous
Nano Series GigE Vision Camera
Nano-M1240
OnSemi Python1300 P3 (1.3M)
Full frame electronic global shutter function
Standard Design
Monochrome
87 fps (Normal Readout Enable)
87 fps (8-bit)
87 fps (10-bit)
87 fps (8-bit)
45 fps (10-bit)
Mono 8-bit
Mono 10-bit
6 µs if exposureAlignment = Synchronous With No Overlap
between the new exposure and the previous readout
65 µs if exposureAlignment = Synchronous With Overlap
between the new exposure and the previous readout
The firmware files for these
Nano-C1240
1280 x 1024
4.8 µm x 4.8 µm
10ke (max)
Standard Design
Bayer
Bayer 8-Bit
Bayer 10-Bit
6 µs
Up to 1 line time
Genie Nano Specifications
RGB-Output
Design
N/A
22 fps (RGBA)
33 fps (RGB)
45 fps (Yuv422)
87 fps (mono-8)
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
•
55