Software Requirements; Sapera Lt Development Software; Third Party Gige Vision Development; About Gige Vision - Teledyne G3-GM10-M0641 User Manual

Software Requirements

Sapera LT Development Software

Teledyne DALSA Software Platform for Microsoft Windows
Sapera LT version 8.00 or later (8.10 or later recommended),
for Windows. Includes Sapera Network Imaging Package and
GigE Vision Imaging Driver, Sapera Runtime and CamExpert.
Provides everything you will need to develop imaging applications
Sapera documentation provided in compiled HTML help,
and Adobe Acrobat® (PDF)
Sapera Processing Imaging Development Library
(available for Windows or Linux – sold separately):
Teledyne DALSA Software Platform for Linux
GigE-V Framework Ver. 2.0 (for both X86 or Arm type processor)

Third Party GigE Vision Development

Third Party GigE Vision Software Platform Requirements
Support of GenICam GenApi version 2.3
Support of GenICam GenApi version 2.3
Support of GenICam XML schema version 1.1
GenICam™ support — XML camera description file

About GigE Vision

The Teledyne DALSA GigE Vision Module provides a license free development platform for Teledyne
DALSA GigE hardware or Sapera vision applications. Additionally supported are Sapera GigE Vision
applications for third party hardware with the purchase of a GigE Vision Module license, or the
Sapera processing SDK with a valid license.
The GigE Vision Compliant XML device description file is embedded within Genie Nano firmware
allowing GigE Vision Compliant applications access to Genie Nano capabilities and controls
immediately after connection.
•
16 Genie Nano Series Overview
General acquisition and control
File access: firmware, configuration data, upload &
download
Embedded within Genie Nano
Genie Nano cameras are 100% compliant with the GigE Vision 1.2
specification which defines the communication interface protocol used by any
GigE Vision device. The device description and capabilities are contained in an
XML file. For more information see:
https://www.visiononline.org/vision-standards-details.cfm?type=5
Genie Nano cameras implement a superset of the GenICam™ specification
which defines device capabilities. This description takes the form of an XML
device description file respecting the syntax defined by the GenApi module of
the GenICam™ specification. For more information see www.genicam.org.
Available for download
http://www.teledynedalsa.com/imaging/support/
Contact Teledyne DALSA Sales
Available for download
http://teledynedalsa.com/imaging/products/softwar
e/linux-gige-v/
Nano Series GigE Vision Camera