4
Quick Start Guide
4.1 Procedure
Follow this procedure:
1. Charge the FLIR ONE camera for approximately 1 hour.
2. Download the FLIR ONE app from your preferred app store, and then install it on your
phone.
3. Push the On/off button on the bottom of the FLIR ONE camera to turn it on. It takes
about 20 seconds for the camera to start. The indicator will flash green when the
FLIR ONE camera is ready.
4. Connect the FLIR ONE camera to your phone. If needed, adjust the blue dial of the
OneFit connector and extend the connector to fit your phone's protective case.
5. Start the FLIR ONE app on your phone.
6. The onboarding of the FLIR ONE app will guide you and help you setup the permis-
sions for the app. After that, the app is opened in Photo mode and is ready to use.
7. To turn off the FLIR ONE camera, push and hold the On/off button for more than 2
seconds.
#T810375; r. AB/76566/76566; en-US
5