Nano Quick Start; Testing Nano Without A Lens; Testing Nano With A Lens; The Camera Works - Now What - Teledyne m640 User Manual

Nano Quick Start

If you are familiar with GigE Vision cameras, follow these steps to quickly install and acquire
images with Genie Nano and Sapera LT in a Windows OS system. If you are not familiar with
Teledyne DALSA GigE Vision cameras go to
Your computer requires a second or unused Ethernet Gigabit network interface (NIC) that is
•
separate from any NIC connected to any corporate or external network.
Install Sapera 8.01 (or later) and make certain to select the installation for GigE Vision support.
•
Connect the Nano to the spare NIC and wait for the
•
show that the Nano is connected. The

Testing Nano without a Lens

Start CamExpert. The Nano Status LED will be steady Green.
•
From the Image Format Feature Category, select the Moving Grey Diagonal Ramp test pattern
•
from the Test Image Selector Parameter.
• Click grab. You will see the moving pattern in the CamExpert display window.

Testing Nano with a Lens

Start CamExpert. The Nano Status LED will be steady Green.
•
Click the Display Control button
•
• Click grab.
Adjust the lens aperture plus Focus, and/or adjust the Nano
•
The Camera Works — Now What
Consult this manual for detailed Networking and Nano feature descriptions, as you write, debug,
and optimize your imaging application.
Nano Series GigE Vision Camera
Connecting the Genie Nano
GigE Server Icon
Nano Status LED
to show a full camera image on CamExpert display.
Camera.
in the Windows tray to
will change to steady Blue.
Exposure Time as required.
Nano Quick Start • 47