Counter And Timer Group Block Diagram - Teledyne G3-GM10-M0641 User Manual

Readout Start
Readout End
Frame Start
Frame Trigger
Frame Burst End
Action 1
Action 2
Line 1
Line 2
Timer 1 End
Counter 1 End
Timer Line Activation
Rising Edge
Falling Edge
Any Edge
Timer Duration
Timer Value
Timer Reset

Counter and Timer Group Block Diagram

Input
Line
Line Selector =
Detection
Line 1 to 4 Level
Physical
Line
Line
Mode
Input
or
ouput
Output
Nano Series GigE Vision Camera
ReadoutEnd
ReadoutStart
FrameStart
ValidFrameTrigger
FrameBurstEnd
Action1
Action2
Timer1End
Counter1End
timerStartLineActivation
RisingEdge
FallingEdge
AnyEdge
timerDuration
timerValue
timerReset
Line Input
Debouncer inverter
LineStatus
Output
Pulse
inverter
generator
Output
Line
Source
Start Timer on Readout Start event.
Start Timer on Readout End event.
Start Timer on Frame Start event.
Start Timer on Frame Trigger event.
Start Timer on Frame Burst End event.
GigEVision Action Command 1. This is a broadcast
command that multiple devices can respond to
simultaneously.
GigEVision Action Command 2. This is a broadcast
command that multiple devices can respond to
simultaneously.
Line1 Start Timer on a transition of I/O Line 1 event.
See Input Signals Electrical Specifications.
Line2 Start Timer on a transition of I/O Line 2 event.
Start Timer on Timer End event.
Start Timer on Counter 1 End event.
Select the trigger activation mode which starts the
timer.
Starts counter on rising edge of the selected signal.
Starts counter on falling edge of the selected signal.
Starts counter on the falling or rising edge of the
selected signal.
Sets the duration (in microseconds) of the timer
pulse.
Reads the current value (in microseconds) of the
selected timer.
Resets the timer to 0 while timerStatus=TimerActive.
Timer then waits for the next timerStartSource event.
Timer and Counter Module
Timer
Counter
Trigger Module
Trigger
Trigger
Line
Source
Activation
Software Driven
Event Driven
Signal Driven
Software Driven
(1.03)
(1.03)
TimerEnd Event
Event Driven
CounterEnd Event
Trigger Signal
Software Trigger
Cmd
Operational Reference
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
•
125