Stock Removal - Siemens SINUMERIK 840D sl Operating Manual

Multi-channel machining
11.2 Multi-channel support
Program view in the G code
1) Machining program in the leading channel
2) Machining program in the following channel
3) 2-channel stock removal cycles, which contain implicit WAIT marks, are identified by a preceding clock symbol.
Figure 11-4 View of a 2-channel stock removal program in G code
11.2.13.2

Stock removal

Calling up the cycle
Precondition
● "programSYNC" option
640
Operating Manual, 05/2017, A5E40868721
Turning