Straight And Circular Machining - Siemens SINUMERIK 840D sl Operating Manual

New C axis rotation
Parameter
Rotation
C
10.7.9

Straight and circular machining

If you want to perform simple, i.e. straight or circular path movements or machining without
defining a complete contour, you can use the functions "Straight" or "Circle" respectively.
General sequence
To program simple machining operations, proceed as follows:
● Specify the tool and the spindle speed
● Program the machining operations
Machining options
The following machining options are available:
● Straight line
● Circle with known center point
● Circle with known radius
Turning
Operating Manual, 05/2017, A5E40868721
Description
● New
New rotation
● Additive
Additive rotation
Rotation C
Programming technology functions (cycles)
10.7 Additional cycles and functions in ShopTurn
Additive C axis rotation
Unit
Degrees
573