Siemens SINUMERIK 840D sl Operating Manual page 746

Managing programs
14.18 Backing up parameters
Backing up data
Which data is offered for backup depends on the machine configuration:
Data
R parameters
Global R parameters
UGUD parameters
Global UGUD parameters ● No
MGUD parameters
Global MGUD parameters ● No
Directory
File name
For multi-channel machines, the parameters of the active channel are always backed up.
Job lists
If you select Back up parameters for a job list, the parameters of all programs that it contains
are backed up.
The name of the job list does not agree with the names of the programs it contains. To
nevertheless permit the unique assignment of the parameter files, they are always assigned
the same name as the associated program. You cannot change these file names.
Procedure
...
746
● No
● Yes - all channel-specific arithmetic parameters
● No
● Yes - all global arithmetic parameters
● No
● Yes - all channel-specific variables of the user
● Yes - all global variables of the user
● No
● Yes - all channel-specific variables of the machine manufacturer
● Yes - all global variables of the machine manufacturer
The directory is displayed, in which the selected program is located.
Here you have the option of changing the suggested file names.
1. Select the "Program Manager" operating area.
2. Select the drive on which the program is saved.
3. Position the cursor on the program whose parameters you want to
back up.
Operating Manual, 05/2017, A5E40868721
Turning