G Functions For Mold Making - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.13 Displaying G functions and auxiliary functions
Display
TRAANG
TRACON
● Current work offsets
● Spindle speed
● Path feedrate
● Active tool
6.13.3

G functions for mold making

In the window "G functions", important information for machining free-form surfaces can be
displayed using the "High Speed Settings" function (CYCLE832).
High-speed cutting information
In addition to the information that is provided in the "All G functions" window, the following
programmed values of the following specific information is also displayed:
● CTOL
● OTOL
● STOLF
The tolerances for G0 are only displayed if they are active.
Particularly important G groups are highlighted.
You have the option to configure which G functions are highlighted.
References
● Additional information is available in the following references:
Function Manual, Basic Functions; Chapter, "Contour/orientation tolerance"
● For information about configuring the displayed G groups, refer to the following document:
SINUMERIK Operate Commissioning Manual
178
Meaning
Inclined axis transformation active
Cascaded transformation active
For TRACON, two transformations (TRAANG and TRACYL or TRAANG and
TRANSMIT) are activated in succession.
Software option
You require the "Advanced Surface" software option in order to use this function.
Operating Manual, 05/2017, A5E40868721
Turning