Auxiliary Functions - Siemens SINUMERIK 840D sl Operating Manual

Procedure
See also
High-speed settings (CYCLE832) (Page 555)
6.13.4

Auxiliary functions

Auxiliary functions include M and H functions preprogrammed by the machine manufacturer,
which transfer parameters to the PLC to trigger reactions defined by the manufacturer.
Displayed auxiliary functions
Up to five current M functions and three H functions are displayed in the "Auxiliary Functions"
window.
Procedure
...
Turning
Operating Manual, 05/2017, A5E40868721
1. Select the "Machine" operating area
2. Press the <JOG>, <MDI> or <AUTO> key.
3. Press the ">>" and "All G functions" softkeys.
The "G Functions" window is opened.
1. Select the "Machine" operating area.
2. Press the <JOG>, <MDA> or <AUTO> key.
6.13 Displaying G functions and auxiliary functions
Machining the workpiece
179