Working with Manual Machine
16.6 More complex machining
Parameters
Parameter
F
Circle input
Direction of rotation
X
Z
I
K
R
16.6
More complex machining
The following functions are available to you for comprehensive machining in manual mode:
● Drilling (center drilling, centering, drilling, reaming, deep-drilling, threads, positions)
● Turning (stock removal, groove, undercut, threads, tapping)
● Milling (face milling, pocket, spigot, multiple edge, groove, thread milling, engraving)
● Contour turning (contour, stock removal, grooving, plunge turning)
Note
Deselecting technological functions
Press the "Back" softkey to return to the main screen from the list of technological functions.
General sequence
For more complex machining processes, proceed in the following order:
● Select the desired function via the corresponding softkey.
● Select the tool and enter the desired values in the parameter screen.
778
Description
Feedrate
● End point + center point
● End point + radius
Clockwise direction of rotation
Counter-clockwise direction of rotation
Target position in the X direction (abs and inc)
Target position in the Z direction (abs and inc)
Circle center point I (inc) - only if circle input via end point and center point
Circle center point K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
Radius - only if circle input via end point and radius
Operating Manual, 05/2017, A5E40868721
Unit
mm/min
mm/rev
mm
mm
mm
mm
mm
Turning