Automatic Block Building; Creating Automated Program Blocks - Siemens SINUMERIK 840D sl Operating Manual

The determined times are lost if you exit the editor using the "Close" softkey or you open or
select another program. The times must be determined again through simulation.
Figure 11-2 Time synchronous view
See also
Editor settings (Page 150)
Setting for automatic mode (Page 192)
11.2.10

Automatic block building

11.2.10.1

Creating automated program blocks

With the "Automatic block building" function, you have a convenient option to automatically
split an existing program subsequently into the desired blocks.
Rules for creating the blocks
You define the rules for creating the blocks in the configuration file.
Turning
Operating Manual, 05/2017, A5E40868721
Multi-channel machining
11.2 Multi-channel support
629