Parameters - Siemens SINUMERIK 840D sl Operating Manual

Additional G commands that are available for use in machining free-form surfaces, are also
activated in the High Speed Settings cycle.
When deselecting CYCLE832, the G groups are programmed to the settings - during the
program run time - that are declared in the machine data for the reset state.
References
For additional information, please refer to the following documentation:
SINUMERIK Operate Commissioning Manual
Programming Manual, Job Planning
See also
G functions for mold making (Page 178)
Procedure
10.6.3.1

Parameters

Parameter Description
Machining
● ∇ (roughing)
● ∇∇ (semi-finishing)
● ∇∇∇ (finishing)
● Deselection
Mold-making
● Advanced Surface
function
● Top Surface
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Turning
Operating Manual, 05/2017, A5E40868721
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Select the "Miscellaneous" softkey.
3. Press the "High Speed Settings" softkey.
The "High Speed Settings" input window is opened.
4. Press the "Default values" softkey if you want to store default values for
axis tolerance values depending on the machining.
Programming technology functions (cycles)
10.6 Further cycles and functions
Unit
557