Siemens SINUMERIK 840D sl Operating Manual page 99

Tailstock
Dimensioning the main spindle tailstock
Procedure
See also
Machining with movable counterspindle (Page 585)
Parameter
Main spindle
ZC1
ZS1
ZE1
XR
ZR
Counter-spindle
Turning
Operating Manual, 05/2017, A5E40868721
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Spindle chuck data" softkeys.
The "Spindle Chuck Data" window opens.
3. Enter the desired parameter.
The settings become active immediately.
Description
Dimensions of the forward edge or stop edge
● Jaw type 1
● Jaw type 2
Main spindle chuck dimensions (inc)
Main spindle stop dimensions (inc)
Jaw dimension, main spindle (inc) - only for "Jaw type 2"
Tailstock diameter - only for tailstock that has been set-up
Tailstock length - only for tailstock that has been set-up
4.9 Monitoring axis and spindle data
Dimensioning the counter-spindle tailstock
Setting up the machine
Unit
mm
mm
mm
mm
mm
99