Programming technology functions (cycles)
10.4 Milling
* Unit of feedrate as programmed before the cycle call
Hidden parameters
The following parameters are hidden. They are pre-assigned fixed values or values that can
be adjusted using setting data.
Parameter
Description
PL (only for G code) Machining plane
SC (only for G
Safety clearance
code)
Machining
Mill circular spigot at the programmed position (X0, Y0, Z0).
position
10.4.6
Multi-edge (CYCLE79)
Function
You can mill a multi-edge with any number of edges with the "Multi-edge" cycle.
You can select from the following shapes with or without a corner radius or chamfer:
Clamping the spindle
For ShopTurn, the "Clamp spindle" function can be set up by the machine manufacturer.
460
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Value
Can be set in SD
Defined in MD
52005
1 mm
Single posi‐
tion
Operating Manual, 05/2017, A5E40868721
x
Turning