Siemens SINUMERIK 840D sl Operating Manual page 238

Creating a ShopTurn program
9.2 Program views
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Graphic view
The graphic view shows the contour of the workpiece as a dynamic graphic with broken lines.
The program block selected in the work plan is highlighted in color in the graphic view.
Figure 9-2
238
... 1. You can move between the program blocks in the work plan by
pressing the <Cursor up> and <Cursor down> keys.
2. Press the ">>" and "Graphic view" softkeys to display the graphic
view.
Graphic view of a ShopTurn program
Operating Manual, 05/2017, A5E40868721
Turning