Siemens SINUMERIK 840D sl Operating Manual page 662

Tool management
13.5 Tool list
You use the configuration file to specify the selection of parameters in the list.
References
Information on the configuration and setting up of the tool list can be found in the following
references:
SINUMERIK Operate Commissioning Manual
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing down‐
ward
Yellow triangle pointing up‐
ward
Green frame
Magazine/location number
Green double arrow
Gray double arrow
Red "X"
662
Software option
In order to be able to manage the parameter spindle direction of rotation, coolant
and tool-specific functions (M1-M4), you require the "ShopMill/ShopTurn" op‐
tion.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tool tip will pro‐
vide a brief description.
The tool is preselected.
The magazine location is positioned at the change po‐
sition.
The magazine location is positioned at the loading po‐
sition.
The magazine location is disabled.
Operating Manual, 05/2017, A5E40868721
Turning