Procedure
- OR -
6.11.3.7
Transferring the drilling positions
Calling the cycles
Turning
Operating Manual, 05/2017, A5E40868721
1.
Reduce file according to your requirements and/or select the working
areas.
2.
Press the "Back" and ">>" softkeys.
3.
Press the "Save DXF" softkey.
4.
Enter the required name in the "Save DXF Data" window and press "OK".
The "Save As" window opens.
5.
Select the required storage location.
6.
If required, press the "New directory" softkey, enter the required name in
the "New Directory" window and press the "OK" softkey to create a direc‐
tory.
7.
Press the "OK" softkey.
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Positions" softkey.
4.
Press the "Arbitary positions" softkey.
The "Positions" input window opens.
- OR -
Press the "Line" softkey.
The "Position Row" input window opens.
- OR -
Press the "Grid" softkey.
The "Position Grid" input window opens.
- OR
Machining the workpiece
6.11 Working with DXF files
161