Siemens SINUMERIK 840D sl Operating Manual page 419

Parameters in the "Input complete" mode
G code program parameters
Input
PRG Name of the program to be generated
PL Machining plane
RP Retraction plane – (only for
machining direction, longitu‐
dinal, inner)
SC Safety clearance
Residual With subsequent residual material removal
material
● Yes
● No
CONR Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
Parameter Description
FX (only ShopTurn) Feedrate in X direction
FZ (only ShopTurn) Feedrate in Z direction
FX (only G Code) Feedrate in X direction
FZ (only for G code) Feedrate in Z direction
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇+∇∇∇ (complete machining)
Machining
● Face
direction
● Longitudinal
Position
● front
● back
● inside
● outside
D Maximum depth infeed - (only for ∇)
XDA 1. Grooving limit tool (abs) – (only for face machining direction)
XDB 2. Grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for ∇)
DI For zero: Continuous cut - (only for ∇)
BL Blank description (only for ∇)
● Cylinder (described using XD, ZD)
● Allowance (XD and ZD on the finished part contour)
● Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
Turning
Operating Manual, 05/2017, A5E40868721
● Complete
mm
mm
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
S / V Spindle speed or constant cutting
rate
10.3 Contour turning
rpm
m/min
Unit
mm/rev
mm/rev
*
*
mm
mm
mm
mm
mm
mm
419