Siemens SINUMERIK 840D sl Operating Manual page 529

Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PRG Name of the program to be generated
PL Machining plane
Milling direction
● Climbing
● Conventional
milling
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining
● Face C
surface
● Face Y
(only for Shop‐
● Face B
Turn)
● Peripheral surface C
● Peripheral surface Y
Clamp/release spindle (only for end face Y/B and peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
Machining The following machining operations can be selected:
● ∇ (roughing)
● ∇∇∇ base (base finishing)
● ∇∇∇ edge (edge finishing)
● Chamfering
Turning
Operating Manual, 05/2017, A5E40868721
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling", "Contour milling" and "Pocket" softkeys.
The "Mill pocket" input window opens.
● Complete
mm
mm
mm/min
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.5 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
529