Layout And Functions - Siemens SINAMICS IOP-2 Operating Instructions Manual

Overview

4.2 Layout and functions

For information on firmware and language upgrades, please see
firmware (Page 25).
Note
IOP functional support
• Drives with SINAMICS firmware 4.7 SP3 or above will support the new commission
processes of "Quick Startup" and "Advanced Startup".
• Drives with GP firmware prior to version 3.4 are not fully supported by the IOP-2.
• The actual menu structure and functionality of the IOP-2 will be influenced by the
following factors:
– The software version and type of Control Unit to which the IOP-2 is fitted.
– The firmware and software version of the IOP-2.
– The selected functional group filtering of the parameters.
4.2 Layout and functions
Overview
The physical layout of the IOP-2 is shown below:
Figure 4-1 Layout of the IOP-2
12
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
Upgrading the IOP-2