Ospf With Dell Networking Os - Dell S4048–ON Configuration Manual

S-series 10gbe switches

Hide thumbs Also See for S4048–ON:

Table of Contents

Figure 103. Priority and Cost Examples

OSPF with Dell Networking OS

The Dell Networking OS supports up to 10,000 OSPF routes for OSPFv2. Within the that 10,000 routes, you can designate up to

8,000 routes as external and up to 2,000 as inter/intra area routes.

Dell Networking OS version 9.4(0.0) and later support only one OSPFv2 process per VRF. Dell Networking OS version 9.7(0.0) and

later support OSPFv3 in VRF. Also, on OSPFv3, Dell Networking OS supports only one OSPFv3 process per VRF.

OSPFv2 and OSPFv3 can co-exist but you must configure them individually.

Dell Networking OS supports stub areas, totally stub (no summary) and not so stubby areas (NSSAs) and supports the following

LSAs, as described earlier.

Router (type 1)

Network (type 2)

Network Summary (type 3)

AS Boundary (type 4)

External LSA (type 7)

Link LSA, OSPFv3 only (type 8)

Opaque Link-Local (type 9)

Grace LSA, OSPFv3 only (type 11)

Open Shortest Path First (OSPFv2 and OSPFv3)