Dell S4048–ON Configuration Manual page 368

S-series 10gbe switches
Hide thumbs Also See for S4048–ON:
Table of Contents

Advertisement

Input Statistics:
0 packets, 0 bytes
0 Vlans
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
3 packets, 192 bytes, 0 underruns
3 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 3 Broadcasts, 0 Unicasts
0 Vlans, 0 throttles, 0 discarded, 0 collisions
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Time since last interface status change: 00:00:31
Dell#
To view which interfaces are enabled for Layer 3 data transmission, use the show ip interfaces brief command in EXEC
Privilege mode. In the following example, TenGigabitEthernet interface 1/6 is in Layer 3 mode because an IP address has been
assigned to it and the interface's status is operationally up.
Dell#show ip interface brief
Interface
TenGigabitEthernet 1/1
TenGigabitEthernet 1/2
TenGigabitEthernet 1/3
TenGigabitEthernet 1/4
TenGigabitEthernet 1/5
TenGigabitEthernet 1/6
TenGigabitEthernet 1/7
TenGigabitEthernet 1/8
TenGigabitEthernet 1/9
To view only configured interfaces, use the show interfaces configured command in the EXEC Privilege mode. In the
previous example, TenGigabitEthernet interface 1/6 is in Layer 3 mode because an IP address has been assigned to it and the
interface's status is operationally up.
To determine which physical interfaces are available, use the show running-config command in EXEC mode. This command
displays all physical interfaces available on the line cards.
Dell#show running
Current Configuration ...
!
interface TenGigabitEthernet 2/6
no ip address
shutdown
!
interface TenGigabitEthernet 2/7
no ip address
shutdown
!
interface TenGigabitEthernet 2/8
no ip address
shutdown
!
interface TenGigabitEthernet 2/9
no ip address
shutdown
368
Interfaces
IP-Address
OK? Method
unassigned
NO
Manual
unassigned
NO
Manual
unassigned
YES Manual
unassigned
YES Manual
unassigned
YES Manual
10.10.10.1
YES Manual
unassigned
NO
Manual
unassigned
NO
Manual
unassigned
NO
Manual
Status
administratively down
administratively down
up
up
up
up
administratively down
administratively down
administratively down
Protocol
down
down
up
up
up
up
down
down
down

Advertisement

Table of Contents
loading

Table of Contents