Setting The Overload Bit; Debugging Is-Is - Dell S4048–ON Configuration Manual

To remove a password, use either the no area-password or no domain-password commands in ROUTER ISIS mode.

Setting the Overload Bit

Another use for the overload bit is to prevent other routers from using this router as an intermediate hop in their shortest path first
(SPF) calculations. For example, if the IS-IS routing database is out of memory and cannot accept new LSPs, Dell Networking OS
sets the overload bit and IS-IS traffic continues to transit the system.
To set or remove the overload bit manually, use the following commands.
• Set the overload bit in LSPs.
ROUTER ISIS mode
set-overload-bit
This setting prevents other routers from using it as an intermediate hop in their shortest path first (SPF) calculations.
• Remove the overload bit.
ROUTER ISIS mode
no set-overload-bit
Example of Viewing the Overload Bit Setting
When the bit is set, a 1 is placed in the OL column in the show isis database command output. The overload bit is set in both
the Level-1 and Level-2 database because the IS type for the router is Level-1-2.
Dell#show isis database
IS-IS Level-1 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
B233.00-00 0x00000003
eljefe.00-00 * 0x0000000A
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00 0x00000002
IS-IS Level-2 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
B233.00-00 0x00000006
eljefe.00-00 * 0x0000000E
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00 0x00000004
Dell#

Debugging IS-IS

To debug IS-IS processes, use the following commands.
• View all IS-IS information.
EXEC Privilege mode
debug isis
• View information on all adjacency-related activity (for example, hello packets that are sent and received).
EXEC Privilege mode
debug isis adj-packets [interface]
To view specific information, enter the following optional parameter:
– interface: Enter the type of interface and slot/port information to view IS-IS information on that interface only.
• View information about IS-IS local update packets.
EXEC Privilege mode
debug isis local-updates [interface]
462
Intermediate System to Intermediate System
0x07BF 1074
0xF963 1196
0x68DF 1108
0x2E7F 1099
0xD1A7 1088
0xC38A 1110
0x53BF 1196
0x68DF 1108
0x2E7F 1099
0xCDA9 1093
0/0/0
0/0/1
0/0/0
0/0/0
0/0/0
0/0/0
0/0/1
0/0/0
0/0/0
0/0/0