Dell S4048–ON Configuration Manual page 961

Table 97. Software Features Supported on VRF
Feature/Capability
Configuration rollback for commands
introduced or modified
LLDP protocol on the port
802.1x protocol on the VLAN port
OSPF, RIP, ISIS, BGP on physical and
logical interfaces
Dynamic Port-channel (LACP) on VLAN
port or a Layer 3 port
Static Port-channel as VLAN port or a
Layer 3 port
Port-monitoring
BFD on physical and logical interfaces
PVST, MSTP, RSTP and 802.1D STP for
VLANs
FRRP (if applicable) for VLANs
Multicast protocols (PIM-SM, MSDP)
PIM-DM
Layer 3 (IPv4/IPv6) ACLs, TraceLists,
PBR, QoS on VLANs
Layer 3 (IPv4/IPv6) ACLs, TraceLists,
PBR, QoS on physical interfaces and
LAGs
IPv4 ARP
IPv6 Neighbor Discovery
Layer 2 ACLs on VLANs
FEED
Layer 2 QoS
Support for storm-control (broadcast and
unknown-unicast)
Support Status for Default VRF
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Support Status for Non-default VRF
No
No
No
Yes
NOTE: OSPF supported on all VRF
ports. OSPF V2 and BGP V4 are
supported on non-default-VRF
ports also. Others supported only
on default-VRF ports.
Yes
Yes
No
No
No
No
Yes
No
Yes
NOTE: ACLs supported on all VRF
VLAN ports. IPv4 ACLs are
supported on non-default-VRFs
also. IPv6 ACLs are supported on
default-VRF only. PBR supported
on default-VRF only. QoS not
supported on VLANs.
No
Yes
Yes
No
No
Yes
No
Virtual Routing and Forwarding (VRF)
961