Dell S4048–ON Configuration Manual page 500

Type
127
127
Inventory Management TLVs
127
127
127
127
127
127
127
127
LLDP-MED Capabilities TLV
The LLDP-MED capabilities TLV communicates the types of TLVs that the endpoint device and the network connectivity device
support. LLDP-MED network connectivity devices must transmit the Network Policies TLV.
• The value of the LLDP-MED capabilities field in the TLV is a 2–octet bitmap, each bit represents an LLDP-MED capability (as
shown in the following table).
• The possible values of the LLDP-MED device type are shown in the following. The Dell Networking system is a network
connectivity device, which is Type 4.
When you enable LLDP-MED in Dell Networking OS (using the advertise med command), the system begins transmitting this
TLV.
500
Link Layer Discovery Protocol (LLDP)
SubType
3
4
Implementation of this set of
TLVs is optional in LLDP-MED
devices. None or all TLVs must
be supported. Dell Networking
OS does not currently support
these TLVs.
5
6
7
8
9
10
11
12–255
TLV
Location Identification
Location Identification
Inventory — Hardware
Revision
Inventory — Firmware Revision Indicates the firmware revision
Inventory — Software Revision Indicates the software revision
Inventory — Serial Number
Inventory — Manufacturer
Name
Inventory — Model Name
Inventory — Asset ID
Reserved
Description
Indicates that the physical
location of the device
expressed in one of three
possible formats:
• Coordinate Based LCI
• Civic Address LCI
• Emergency Call Services
ELIN
Indicates power requirements,
priority, and power status.
Indicates the hardware revision
of the LLDP-MED device.
of the LLDP-MED device.
of the LLDP-MED device.
Indicates the device serial
number of the LLDP-MED
device.
Indicates the manufacturer of
the LLDP-MED device.
Indicates the model of the
LLDP-MED device.
Indicates a user specified
device number to manage
inventory.
—