Configuring Vxlan Gateway; Connecting To An Nvp Controller - Dell S4048–ON Configuration Manual

Figure 152. Create Gateway
4. Create Logical Switch
You can create a logical network by creating a logical switch. The logical network acts as the forwarding domain for workloads
on the physical as well as virtual infrastructure.
Figure 153. Create Logical Switch
5. Create Logical Switch Port
A logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway connection to an external
network. It binds the virtual access ports in the GW to logical network (VXLAN) and VLAN.
Figure 154. Create Logical Switch Port
NOTE: For more details about NVP controller configuration, refer to the NVP user guide from VMWare .

Configuring VxLAN Gateway

To configure the VxLAN gateway on the switch, follow these steps:
1. Connecting to NVP controller
2. Advertising VXLAN access ports to controller

Connecting to an NVP Controller

To connect to an NVP controller, use the following commands.
1. feature vxlan
954
Virtual Extensible LAN (VXLAN)