Configure Gvrp; Related Configuration Tasks; Enabling Gvrp Globally - Dell S4048–ON Configuration Manual

S-series 10gbe switches

Hide thumbs Also See for S4048–ON:

Table of Contents

Configure GVRP

To begin, enable GVRP.

To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP configuration is per interface on a switch-by-

switch basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following

example, GVRP is configured on VLAN trunk ports.

Figure 46. Global GVRP Configuration Example

Basic GVRP configuration is a two-step process:

Enabling GVRP on a Layer 2 Interface

Configure GVRP Registration

Configure a GARP Timer

Enabling GVRP Globally

To configure GVRP globally, use the following command.

Enable GVRP for the entire switch.

GARP VLAN Registration Protocol (GVRP)