Dell S4048–ON Configuration Manual page 105

Example of Viewing Configured Authentication
View your configuration using the show config command from INTERFACE mode, as shown in the example in
Guest VLAN or using the show dot1x interface command from EXEC Privilege mode.
802.1x information on Te 2/1:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Guest VLAN:
Guest VLAN id:
Auth-Fail VLAN:
Auth-Fail VLAN id:
Auth-Fail Max-Attempts: 5
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Auth Type:
Auth PAE State:
Backend State:
Enable
FORCE_AUTHORIZED
UNAUTHORIZED
Disable
None
Disabled
200
Disabled
100
90 seconds
120 seconds
10
15 seconds
15 seconds
7200 seconds
10
SINGLE_HOST
Initialize
Initialize
Configuring a
105
802.1X