Dell S4048–ON Configuration Manual page 1003

3. Start diagnostics on the unit.
diag stack-unit stack-unit-number
When the tests are complete, the system displays the following message and automatically reboots the unit.
Dell#00:09:42 : Diagnostic test results are stored on file: flash:/TestReport-SU-0.txt
Diags completed... Rebooting the system now!!!
Mar 12 10:40:35: %S4810:0 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on stack unit 0
Diagnostic results are printed to a file in the flash using the filename format TestReport-SU-<stack-unit-id>.txt.
Log messages differ somewhat when diagnostics are done on a standalone unit and on a stack member.
4. View the results of the diagnostic tests.
EXEC Privilege mode
show file flash://TestReport-SU-stack-unit-id.txt
Examples of Running Offline Diagnostics
The following example shows the offline stack-unit id command.
The following example shows the show system brief command.
Dell#show system brief
Stack MAC : 00:01:e8:8b:5d:8c
Reload-Type
-- Stack Info --
Unit UnitType
------------------------------------------------------------------------------------
0 Management
1 Member
2 Member
3 Member
4 Member
5 Member
6 Member
7 Member
8 Member
9 Member
10 Member
11 Member
-- Power Supplies
Unit Bay Status
---------------------------------------------------------------------------
0 0 down
0 1 up
-- Fan Status --
Unit Bay TrayStatus
------------------------------------------------------------------------------------
0 0 up
0 1 up
Speed in RPM
The following example shows the diag command (standalone unit).
Dell#diag stack-unit 1
Warning - diagnostic execution will cause multiple link flaps on the peer side - advisable
to shut directly connected ports
Proceed with Diags [confirm yes/no]: yes
Dell#Jan 16 02:22:46: %S4810:0 %DIAGAGT-6-DA_DIAG_STARTED: Starting diags on stack unit 1
00:06:47 : Approximate time to complete the Diags ... 13 Mins
: normal-reload [Next boot : normal-reload]
Status ReqTyp
online S4810
not present
not present
not present
not present
not present
not present
not present
not present
not present
not present
not present
--
Type FanSpeed(rpm)
UNKNOWN
AC
Fan0 Speed
up 13466
up 13653
CurTyp
S4810
0
14000
Fan1 Speed
up 13466
up 13466
Version Ports
9-4(0-89) 64
Debugging and Diagnostics
1003