Dell S4048–ON Configuration Manual page 288

S-series 10gbe switches

Hide thumbs Also See for S4048–ON:

Table of Contents

Figure 39. Configuring a Relay Agent

To view the ip helper-address configuration for an interface, use the show ip interface command from EXEC privilege

Example of the show ip interface Command

R1_E600#show ip int tengigabitethernet 1/3

TenGigabitEthernet 1/3 is up, line protocol is down

Internet address is 10.11.0.1/24

Broadcast address is 10.11.0.255

Address determined by user input

IP MTU is 1500 bytes

Helper address is 192.168.0.1

Directed broadcast forwarding is disabled

Proxy ARP is enabled

Split Horizon is enabled

Poison Reverse is disabled

ICMP redirects are not sent

ICMP unreachables are not sent

Dynamic Host Configuration Protocol (DHCP)

Troubleshooting