Creating A Community Vlan; Creating An Isolated Vlan - Dell S4048–ON Configuration Manual

ip address ip address
7. (OPTIONAL) Enable/disable Layer 3 communication between secondary VLANs.
INTERFACE VLAN mode
ip local-proxy-arp
NOTE: If a promiscuous or host port is untagged in a VLAN and it receives a tagged packet in the same VLAN, the packet
is NOT dropped.

Creating a Community VLAN

A community VLAN is a secondary VLAN of the primary VLAN in a private VLAN.
The ports in a community VLAN can talk to each other and with the promiscuous ports in the primary VLAN.
1. Access INTERFACE VLAN mode for the VLAN that you want to make a community VLAN.
CONFIGURATION mode
interface vlan vlan-id
2. Enable the VLAN.
INTERFACE VLAN mode
no shutdown
3. Set the PVLAN mode of the selected VLAN to community.
INTERFACE VLAN mode
private-vlan mode community
4. Add one or more host ports to the VLAN.
INTERFACE VLAN mode
tagged interface or untagged interface
You can enter the interfaces singly or in range format, either comma-delimited (slot/port,port,port) or hyphenated
(slot/ port-port).
You can only add host (isolated) ports to the VLAN.

Creating an Isolated VLAN

An isolated VLAN is a secondary VLAN of a primary VLAN.
An isolated VLAN port can only talk with the promiscuous ports in that primary VLAN.
1. Access INTERFACE VLAN mode for the VLAN that you want to make an isolated VLAN.
CONFIGURATION mode
interface vlan vlan-id
2. Enable the VLAN.
INTERFACE VLAN mode
no shutdown
3. Set the PVLAN mode of the selected VLAN to isolated.
INTERFACE VLAN mode
private-vlan mode isolated
4. Add one or more host ports to the VLAN.
Private VLANs (PVLAN)
663