Viewing Supportassist Configuration - Dell S4048–ON Configuration Manual

SUPPORTASSIST SERVER mode
[no] url uniform-resource-locator
Dell(conf-supportassist-serv-default)#url https://192.168.1.1/index.htm
Dell(conf-supportassist-serv-default)#

Viewing SupportAssist Configuration

To view the SupportAssist configurations, use the following commands.
1. Display information on SupportAssist feature status including any activities, status of communication, last time communication
sent, and so on.
EXEC Privilege mode
show support-assist status
Dell#show support-assist status
SupportAssist Service: Installed
EULA: Accepted
Server: default
Enabled: Yes
URL: https://stor.g3.ph.dell.com
Server: chennai
Enabled: Yes
URL: http://10.16.148.19/
Activity
-----------------------
full-transfer
2. Display the current configuration and changes from the default values.
EXEC Privilege mode
show running-config support-assist
Dell# show running-config support-assist
!
support-assist
!
activity full-transfer
enable
activity-manifest install testing
!
contact-company name My Company
street-address 123 Main Street
address city MyCity country MyCountry
!
contact-person first john last doe
email-address primary jdoe@mycompany.com
preferred-method email
!
server default
enable
url https://192.168.1.1/index.htm
3. Display the EULA for the feature.
EXEC Privilege mode
show eula-consent {support-assist | other feature}
Dell#show eula-consent
SupportAssist EULA has been: Accepted
State Last Start
------- ------------------------
Success Aug 10 2015 11:15:26 PST
Last Success
------------------------
Aug 10 2015 11:15:28 PST
SupportAssist
863