Upgrading To The Full Height Riser Module; Preliminary Steps - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.6

Upgrading to the full height riser module

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Figure 135: Upgrade kit
1 Full height riser module
2 Extension bracket
3 Screw
9.5.6.1

Preliminary steps

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê Remove the riser module 2 and the riser module 3 as described in section
"Handling riser modules" on page
204
62.
Upgrade and Maintenance Manual
Hardware: 10 minutes
RX2530 M1