Symmetricom TimeCreator 1000 User Manual page 289

Table D-10. IMC and Communication Parameters (Continued)
Description
Eth0 IP state
Eth0 Host IP Address
Eth0 Host Gateway Address
Eth0 Host Mask
Eth1 IP mode
Eth1 IP state
Eth1 Host IP Address
Eth1 Host Gateway Address
Eth1 Host Mask
Hostname
SNMP Trap Destination IP
Address
SNMP Username (list)
SNMP Authentication Key (list)
SNMP Private Key (list)
NTP Server Key ID
NTP Server Encryption Key
NTP Peer IP or hostname
NTP Peer Key ID
NTP Peer Encryption Key
RADIUS Authentication
RADIUS Server IP Address
RADIUS Server Key
TACACS+ Authentication
TACACS+ Server #1 IP
Address
TACACS+ Server key
Local Alarm Log Buffer Size
Local Event Log Buffer Size
097-93100-01 Revision C – February, 2010
Appendix D Specifications and Factory Defaults
Default Value
Enable Enable|Disable
10.0.0.100 Valid IPv4 Host Address
0.0.0.0 Valid IPv4 Gateway Address
255.255.255.0 (24) 0 to 32
Static Static|DHCP
Enable Enable|Disable
10.0.0.101 Valid IPv4 Host Address
0.0.0.0 Valid IPv4 Gateway Address
255.255.255.0 (24) 0 to 32
TC1000 20 ASCII characters
Valid IPv4 Host Address or
20 ASCII Characters
20 ASCII Characters
20 ASCII Characters
a Minimum of 8 characters
1 to 65535
Max of 32 ASCII Characters
Valid IPv4 Address or hostname
1 to 65535
Max of 32 ASCII Characters
Disable Enable | Disable
Valid IPv4 Host Address
Max of 32 ASCII characters
Disable Enable | Disable
Valid IPv4 Host Address
Maximum of 32 ASCII
characters
100 0 to 100 kbytes
100 0 to 100 kbytes
Factory Defaults
Value Range
TimeCreator 1000 User's Guide 289