Symmetricom TimeCreator 1000 User Manual page 231

Show Mode
This command displays the TimeCreator 1000 mode configuration, either root or
subtending.
Command Syntax:
show mode
Example:
tc1000>show mode
Response:
Operation Mode
Remarks: For subtending mode, this command returns "proxy". This is the term
used by the SNMP MIB.
Related:
set tod-source
Level : User, Power-User and Admin
097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
- root
CLI Commands
TimeCreator 1000 User's Guide 231