Symmetricom TimeCreator 1000 User Manual page 202

Appendix B Command Descriptions and Communications Interface
CLI Commands
To provision the firewall to allow or block NTP traffic -

set firewall ntp {enable|disable}
To provision the firewall to allow or block SNMP traffic -

set firewall snmp {enable|disable}
To provision the firewall to allow or block RADIUS traffic -

set firewall radius {enable|disable}
To provision the firewall to allow or block TACACS+ traffic -

set firewall tacplus {enable|disable}
To provision the firewall to allow or block Syslog traffic -

set firewall syslog {enable|disable}
Example 1:
To enable the firewall to allow NTP traffic -
tc1000> set firewall ntp enable
Example 2
To disable the firewall to block RADIUS traffic -
tc1000> set firewall radius enable
Related:
show firewall
Level : Power-User and Admin only
202 TimeCreator 1000 User's Guide 097-93100-01 Revision C – February, 2010