Installing The Timecreator 1000; Working With Modules - Symmetricom TimeCreator 1000 User Manual

Figure 3-1.

Installing the TimeCreator 1000

Working With Modules

This section describes how to install, remove, and handle the modules associated
with the TimeCreator 1000.
Handling Modules
When handling any of the modules, observe the following precautions:
1. Use proper static control precautions when handling modules! Protect the
equipment against ESD (electrostatic discharge) by using a grounded protective
wrist strap and normal equipment grounding.
2. Avoid touching component leads and edge connectors.
3. Avoid placing the module on an ungrounded surface.
4. Avoid allowing the module to come in contact with insulated surfaces.
097-93100-01 Revision C – February, 2010
Chapter 3 Installing the TimeCreator 1000
Working With Modules
TimeCreator 1000 User's Guide 51